HPI Racing Stage-D10 Flux Ford Mustang GT RTR S650 - B.Hobson | HPI161009 | 161009
Stage-D10 Flux Ford Mustang GT RTR S650 - B.Hobson
The Stage-D10 is HPI Racing's purpose-built 1/10th scale rear-wheel-drive drift platform, combining a great Ready-To-Run setup with the huge range of tuning possibilities demanded by today's RC drifters. Developed from the ground up over three years, the Stage-D10 has been tested across multiple surfaces, by drivers ranging from RWD newcomers to experienced RC drifters. That testing helped HPI refine the chassis, add new features and develop a factory setup that delivers great all-around performance straight out of the box. Underneath, there's a serious amount of adjustment waiting to be explored.
And because this is HPI, the first Stage-D10 RTR cars come topped with stunning officially licensed 2024 Ford Mustang RTR Spec-5 FD bodies, complete with authentic Formula Drift liveries, molded scale details, replica wheels and a full LED light system. New to RWD drifting? The Stage-D10 will give you the confidence to get it on the track and start driving. Already know your way around a drift chassis? The Stage-D10 has the base for almost any setup you want straight from the box, with no extra parts required.
Required to Complete:
Battery & Charger
Features:
1:10th RWD dedicated Drift chassis
Rear gearbox has over 100 positions
3 or 4 gear gearbox configurations with the ability to swap motor direction
Oil-filled threaded-bodied coil-over shocks
Adjustable wheelbase (246-264mm with wishbone placement)
Adjustable battery holders for shorty packs with mid and rear placement
4 servo placement options (requires longer turnbuckles not included)
Fully adjustable Ackermann geometry. (FWD/BACK & UP/DOWN)
Sway-Bar mounts front and rear (Optional)
Magnetic body mount system or conventional post positions for HPI/Yokomo
Adjustable Toe block options included
Multiple roll center and camber gain positions front and rear
Adjustable Wheel Hex spacing 1 or 2mm extra offset
Multiple-position gyro mounting bracket along the top deck
Servo saver or solid servo arm options included
Rotating brake discs detail
5 Piece Polycarbonate Pre-printed, Pre-Assembled, decaled bodyshell
Plastic body details including grills, lights, vents and mirrors
Full LED kit including grill lights, headlights, tail and brake lights
Specifications:
ESC: FLX-D10 80A Sensored Flux ESC
MOTOR: FLX-D10-3650 10.5T Sensored Flux Motor
SERVO: HPI SX-12MGLP Servo (7.4V/12kg/Metal Geared)
RADIO: TF-51 4-Ch Transmitter & RF-51 Receiver
DIMENSION (L x W x H): 460 X 200 X 120 (mm)
WHEELBASE: 255 (mm)
Stage-D10 Flux Ford Mustang GT RTR S650 - B.Hobson
The Stage-D10 is HPI Racing's purpose-built 1/10th scale rear-wheel-drive drift platform, combining a great Ready-To-Run setup with the huge range of tuning possibilities demanded by today's RC drifters. Developed from the ground up over three years, the Stage-D10 has been tested across multiple surfaces, by drivers ranging from RWD newcomers to experienced RC drifters. That testing helped HPI refine the chassis, add new features and develop a factory setup that delivers great all-around performance straight out of the box. Underneath, there's a serious amount of adjustment waiting to be explored.
And because this is HPI, the first Stage-D10 RTR cars come topped with stunning officially licensed 2024 Ford Mustang RTR Spec-5 FD bodies, complete with authentic Formula Drift liveries, molded scale details, replica wheels and a full LED light system. New to RWD drifting? The Stage-D10 will give you the confidence to get it on the track and start driving. Already know your way around a drift chassis? The Stage-D10 has the base for almost any setup you want straight from the box, with no extra parts required.
Required to Complete:
Battery & Charger
Features:
1:10th RWD dedicated Drift chassis
Rear gearbox has over 100 positions
3 or 4 gear gearbox configurations with the ability to swap motor direction
Oil-filled threaded-bodied coil-over shocks
Adjustable wheelbase (246-264mm with wishbone placement)
Adjustable battery holders for shorty packs with mid and rear placement
4 servo placement options (requires longer turnbuckles not included)
Fully adjustable Ackermann geometry. (FWD/BACK & UP/DOWN)
Sway-Bar mounts front and rear (Optional)
Magnetic body mount system or conventional post positions for HPI/Yokomo
Adjustable Toe block options included
Multiple roll center and camber gain positions front and rear
Adjustable Wheel Hex spacing 1 or 2mm extra offset
Multiple-position gyro mounting bracket along the top deck
Servo saver or solid servo arm options included
Rotating brake discs detail
5 Piece Polycarbonate Pre-printed, Pre-Assembled, decaled bodyshell
Plastic body details including grills, lights, vents and mirrors
Full LED kit including grill lights, headlights, tail and brake lights
Specifications:
ESC: FLX-D10 80A Sensored Flux ESC
MOTOR: FLX-D10-3650 10.5T Sensored Flux Motor
SERVO: HPI SX-12MGLP Servo (7.4V/12kg/Metal Geared)
RADIO: TF-51 4-Ch Transmitter & RF-51 Receiver
DIMENSION (L x W x H): 460 X 200 X 120 (mm)
WHEELBASE: 255 (mm)